https://support.software.dell.com/sonicwall-e-class-nsa-series/kb/sw11833


Title
URLs not Showing under AppFlow Monitor, How to Configure AppFlow Monitor to Show / Display URLs.
Resolution

Article Applies To:
Gen6 SM E10000 series: NSA E10800, NSA E10400, NSA E10200, NSA E10100
Gen6 SM 9000 series: NSA 9600, NSA 9400, NSA 9200
Gen6 NSA Series: NSA 6600, NSA 5600, NSA 4600, NSA 3600, NSA 2600

Gen5 NSA E-Class series: NSA E8510, E8500, NSA E7500, NSA E6500, NSA E5500
Gen5 NSA series: NSA 5000, NSA 4500, NSA 3500, NSA 2400, NSA 2400 MX, NSA 240, NSA 220, NSA 220 /W. NSA 250M, NSA 250M W
Gen5 TZ Series: TZ 210, TZ 210 Wireless, TZ 215, TZ 215 W

Firmware/Software Version: 5.8.x.x, 5.9.x.x
Services: (AppFlow, Dashboard, Content Filtering)

Problem Definition:

This article explains, how to configure "AppFlow Monitor" to display URLs. It has been noticed that AppFlow Monitor is enabled and dispalying users under "Users" tab, however, URLs are not shown under "URLs" tab.



No URLs are showing under "URLs" tab, as shown in the screenshot below:



Resolution:

Step 1: Enable AppFlow.

Navigate to AppFlow | Flow Reporting | Settings | and enable check box next to "AppFlow To Local Colleector", as shown below:



Step 2: Enable CFS (Content Filtering Service) on Zone(s).

In order to view URLs in "AppFlow Monitor", CFS engine needs to be enabled on the Required Zones on Dell SonicWALL Firewall.

A) Navigate to Network | Zones and click on "Configure" button for LAN Zone, as shown below:


Full post and images here:

https://support.software.dell.com/sonicwall-e-class-nsa-series/kb/sw11833