Consider Peplink 305 and above:

Not listed in the compare matrix / god know why - Peplink 305 and above support Guest Protect

Example Question:

I have an AP One AC mini being controlled from a Balance 30. I can't seem to create an SSID that will enable me to isolate connected Wireless Clients from the LAN.
LAN is 192.168.4.xxx
I have checked the "Layer 2 Isolation" checkbox on the Balance30, but I still can connect to local computers on the LAN from the AP (i.e. http://192.168.4.1).

As a side-note.....
The only way I have managed isolation is by (on the AP interface, not the balance 30) checking the Layer 2 isolation checkbox AND entering 192.168.4.1 on the "Guest Protect / Subnet" textbox. But I need to have the AP controlled by the Balance30 and as soon as set the Balance30 as the controller, all SSID settings on the AP get (obviously) overridden by the Balance30, and the Balance30 does not have the "Guest Protect" options.

I know that I am not trying to do anything new here, so any help would be greatly appreciated.

Cris.-

Answer:
Hi Cris,

Guest Protect is a feature that meet your requirement. However this is available for Balance 305 and above. Please consider mid range model. You may find our product comparison here (http://www.peplink.com/products/balance/model-comparison/).

https://forum.peplink.com/threads/4495-LAN-isolation-with-Balance30-and-AP-One-AC-mini-help-needed

Please find the attached. X (red cross) represents blocking for L2 Isolation and X green cross represents blocking for Guest Protect (Block All Private IP). Balance 20 only support L2 Isolation.




Business Grade Web Hosting for the cost of Starbucks Coffee

Liquid Layer Networks | Performance Cloud Web Hosting
http://www.LiquidLayer.net